MODEL PAVH-12V1GMA (R290)/ HEAT PUMP DC Inverter Air to Water

€8,141.00

MODEL	UNIT TYPE	POWER	SIZE
PAVH-12V1GMA	HeatStar Monoblock	12kw	12104601150

R290 is one of the best refrigerant available for mass production up to now: Negligible Global Warming Potential (GWP) and degradation time is considered in monthes; Zero ozone layer depletion potential (ODP); Permanent green; Less load for the same performance; Low energy consumption and higher efficiency. Thanks to the use of R290, Migloor heatSTAR+ series (R290) is now not only the best solution for new building, but also possible to fit the retrofit market by lifting up maximum heating temperature to 70°C. With good performance in this water temperature rante, air to water heat pump unit is now possible to be used to replace the old gas/oil boiler without changing the existing heating distribution system, even has old radiators inside.

MODEL

€8,141.00

TECHNICAL DATA

Model			PAVH-06V1GMA	PAVH-09V1GMA	PAVH-12V1GMA	PAVH-15V4GMA
Power Supply / Refrigerant		V/Hz/Ph	220-240/50/1 - R290	220-240/50/1 - R290	220-240/50/1 - R290	380-400/50/3 - R290
Max. Heating Capacity (1)		kW	6,75	9,5	12,0	16,5
C.O.P (1)		W/W	4,45	4,55	3,92	3,98
Heating Capacity Min./Max.(1)		kW	2.2 / 6.75	3.1 / 9.5	3.8 / 12	5.6/16.5
Heating Power Input Min./Max.(1)		W	470 / 1520	585/ 2089	900 / 3065	1120/4170
C.O.P Min./Max.(1)		W/W	4.45 / 5.05	4.6 / 5.1	3.92/ 4.8	3.98/5.05
Max. Heating Capacity(2)		kW	6,5	9	11	15,5
C.O.P (2)		W/W	3,6	3,75	3,28	3,25
Heating Capacity Min./Max.(2)		kW	2.0 /6.5	2.7 /9.0	3.7/ 11.0	5.3/15.5
Heating power input Min./Max.(2)		W	500 /1800	725 / 2400	1100 / 3350	1370/4770
C.O.P Min./Max.(2)		W/W	3.6 / 3.85	3.75 / 4.0	3.28/3.7	3.25/3.85
Max. Cooling Capacity (3)		kW	5,5	8	10,2	13,2
E.E.R (3)		W/W	4,3	3,8	3,6	3,65
Cooling Capacity Min./Max.(3)		kW	2.7 / 5.5	2.4 / 8.0	5.0/10.2	6.9/13.2
Cooling Power Input Min./Max.(3)		W	620 / 1270	765 / 2100	1400/2840	1540/3650
E.E.R Min./Max.(3)		W/W	4.3 / 4.6	3.80 / 4.0	3.6/3.9	3.65/4.4
Max. Cooling Capacity (4)		kW	3,4	6	7,5	10,1
E.E.R (4)		W/W	2,95	2,90	2,75	2,85
Cooling Capacity Min./Max.(4)		kW	1.6 /3.4	1.8 /6.0	3.6/7.5	4.8/10.1
Cooling Power Input Min./Max.(4)		W	560 /1210	720 /1945	1330/2740	1550/3540
E.E.R Min./Max.(4)		W/W	2.8 / 2.95	2.9 / 3.05	2.75/2.90	2.85/3.05
Workable Ambient Temperature Range		℃	-25~45	-25~45	-25~45	-25~45
Max. System Water Temperature (Heating / Cooling)		℃	20 / 70	20 / 70	20 / 70	20 / 70
Min. System Water Temperature (Heating / Cooling)		℃	20 / 7	20 / 7	20 / 7	20 / 7
Max. Operation High Pressure		MPa	3.10	3.10	3.10	3.10
Max. Operation Low Pressure		MPa	0.82	0.82	0.82	0.82
Compressor	Type - Quantity/System		Twin Rotary - 1	Twin Rotary - 1	Twin Rotary - 1	Twin Rotary - 1
Refrigerant	Type / Amount	- / kg	R290 / 0.6kg	R290 / 0.7kg	R290 /0.9kg	R290 / 1.5kg
Fan	Quantity		1	1	1	2
	Airflow	m³/h	3150	3150	3300	6300
	Rated power	W	62	62	62	124
Noise Level (sound power)	Indoor/Outdoor	dB(A)	30/52	30/52	30/52	30/59
Water Side Heat Exchanger	Type		Plate Heat Exchanger	Plate Heat Exchanger	Plate Heat Exchanger	Plate Heat Exchanger
	Water Pressure Drop	kPa	23	23	23	23
	Piping Connection	Inch	G1"	G1"	G1"	G1-1/4"
Allowable Water Flow	Min./Rated./Max.	L/S	0.21/0.29/0.35	0.21/0.29/0.35	0.34/0.57/0.68	0.56/0.93/1.12
Net Dimension(L×D×H)	Indoor Unit	mm	570x550x260	570x550x260	570x550x260	570x550x260
Net Dimension(L×D×H)	Outdoor Unit	mm	1165x370x850	1165x370x850	1165x370x950	1085x390x1450
Net Weight	Indoor Unit	Kg	25	25	25	25
Net Weight	Outdoor Unit	Kg	90	98	110	145

Note: (1) Heating condition: water inlet/outlet temperature: 30℃/35℃, Ambient temperature: DB 7℃/WB 6℃; (2) Heating condition: water inlet/outlet temperature: 40℃/45℃, Ambient temperature: DB 7℃/WB 6℃; (3) Cooling condition: water inlet/outlet temperature: 23℃/18℃, Ambient temperature: DB 35℃/WB 24℃; (4) Cooling condition: water inlet/outlet temperature: 12℃/7℃, Ambient temperature: DB 35℃/WB 24℃; (5) The specifications are subject to change without prior notice. For actual specifications of unit, please refer to the stickers on the unit.

Main Components

The overall structural designs of our products have been carefully developed to make the installation and service as easy as possible

Outdoor unit structure

. 4 screws to open the fan guard to get access to fan system and bottom plate heater.

. 2 screws to open the service panel to compressor system.

Indoor unit structure

Front panel swings open like a door, with easy access to the control system. All connections from controller are connected via terminal blocks. This allows the wiring and trouble-shooting work on the unit clear and easy. Swing open the control box like a door, allowing hydraulic system to become fully exposed, which provides sufficient space to work on any component inside the unit.

MAIN CHARACTERISTICS

High energy efficiency and stable performance with full inverter technology, it reaches A+++ energy level and COP is up to 5. Monoblock design for easy installation Low noise solution with EC fan motor and improved air duct system, as low as 52dB(A) Supply high water temperature up to 70℃. Work down to -25℃

Control System

AMITIME can be controlled directly by following methods

• Operation Panel: Installed on the unit, the panel provides two separate operation systems for the user to choose; EcoTouch and EcoPress.

• Smart Phone: By using Amitime APP or APK, users can access to the basic settings remotely via iPhone or Andriod smart phones.

• Computer: Users via computer can login Amitime web server remotely and change any setting, view historic running status, as well as update the software from anywhere remotely

Our Wi-Fi Heat Pump Control application allows users control the basic setting of the heat pump: Turn the system on/off. Change the temperature setting. Change the mode

Computer Control function is only available for the units equipped with EcoTouch control system. Users, via computer can login Amitime web server remotely and change any setting, view historic running status, as well as update the software from anywhere remotely